AC to DC Power Supplies

Designed and tested to the most rigorous standards, configurable to best fit your application.

hero about img

Abbott Technologies’ standard AC to DC power supplies have been designed to provide clean and quiet DC power while complying with the rigorous conditions imposed by today’s defense and aerospace environments. They have been designed, tested, and qualified in advance to a variety of key specifications thereby simplifying the task of system compliance.

These models are available in different grades depending on the temperature and environmental requirements of your application, providing you with an optimal cost-performance solution. We maintain full control of our configurations, building all assemblies in house. This not only allows us to guarantee performance over the full life of a program but also allows us to accommodate requests for modifications to units quickly, often for a nominal charge.

All models use the highest MTBF parts available and feature ‘smart’ functions including TTL DC OK Signal, Inhibit/Remote On Off, Sense Compensation, and Current Sharing (additional options available upon request). All units are screened and burned in. We can additionally provide special testing, documentation, extended burn-in, and Environmental Stress Screening (ESS) upon request.

AC DC Solutions to meet your specific requirements provided upon request.

For any Inquires regarding existing PS-Model Numbers, please contact us for more information.


AM200 Series – 200 Watt Sealed AC to DC Switchers

High Efficiency, Compact Size. Currently serving in many active programs, this Series features full Power Factor Correction and is designed to perform in extreme environments. Designed to meet MIL-S-901 High Impact Shock and MIL-STD-810 Environmental Requirements, MIL-STD-704 and MIL-STD-1399 Input Requirements, MIL-STD-461 EMI Requirements. This series is IP65 sealed (IP67 available) and features MS3470 connectors as standard. Factory Configurable.

Explore This Product or Download Spec Sheet

AS200 Series – 200 Watt AC to DC Switchers

High Efficiency, Compact Size. Proven in many existing applications, this Series features full Power Factor Correction and is designed to perform in rugged applications. Designed to meet MIL-S-901 High Impact Shock and MIL-STD-810 Environmental Requirements, MIL-STD-704 and MIL-STD-1399 Input Requirements, MIL-STD-461 EMI Requirements. Factory Configurable.

Explore This Product or Download Spec Sheet

CM500 Series – 500 Watt Sealed AC to DC Switchers

High Efficiency, Low Profile. Currently serving in many active programs, this Series features full Power Factor Correction and is designed to perform in extreme environments. Designed to meet MIL-S-901 High Impact Shock and MIL-STD-810 Environmental Requirements, MIL-STD-704 and MIL-STD-1399 Input Requirements, MIL-STD-461 EMI Requirements. This series is IP65 sealed (IP67 available) and features MS3470 connectors as standard. Factory Configurable.

Explore This Product or Download Spec Sheet

CS500 Series – 500 Watt AC to DC Switchers

High Efficiency, Low Profile. Proven in many existing applications, this Series features full Power Factor Correction and is designed to perform in rugged applications. Designed to meet MIL-S-901 High Impact Shock and MIL-STD-810 Environmental Requirements, MIL-STD-704 and MIL-STD-1399 Input Requirements, MIL-STD-461 EMI Requirements. Factory Configurable.

Explore This Product or Download Spec Sheet

CM1000 Series – 1000 Watt Sealed AC to DC Switchers

High Efficiency, Power Dense, Customer Configurable. Currently serving in many active programs, the CM1000 Series features Power Factor Correction and is designed to perform in extreme environments. Designed to meet MIL-S-901 High Impact Shock and MIL-STD-810 Environmental Requirements, MIL-STD-704 and MIL-STD-1399 Input Requirements, MIL-STD-461 EMI Requirements.

Explore This Product or Download Spec Sheet

 

LPS Series – Linear Power Supplies for Critical Applications

Designed for long running critical applications that require linear
power and regulation, the LPS Series is constructed with modern
components and manufacturing practices to improve performance
and provide long term support. MIL-STD-1399 and MIL-STD-704 Input, MIL-STD-810 and MIL-S-901 Environmental Requirements.
LPS Series units can be configured to provide Form, Fit,
Function replacement of existing, obsoleted linear power supplies. Available in single and multiple output configurations.

Contact Us for More Information


Legacy Power Supplies

Abbott maintains full control of our configurations, building all assemblies in house. We guarantee performance over the full life of a program and do not obsolete products. This also allows us to not only accommodate requests for modifications to units quickly and cost-effectively but also allows us to support legacy products, shown below.

ZB Series – 120 Watt Industrial AC to DC Switchers

ZB Series

The ZB Series is a pulse-width modulated, forward converter power supply using a single switching transistor at a frequency of 38 KHz. It is designed and manufactured to deliver reliable, regulated power for compact electronic systems that must provide long-term, trouble-free performance.

Explore This Product or Download Spec Sheet

ZBT Series – 100 Watt Triple Output Industrial AC to DC Switchers

ZB Series

The ZBT Series is a three-output switching power supply providing the high power density and performance usually available only from custom designs. Each output is fully regulated to satisfy the appropriate power requirements of linear and digital circuits. Its small size makes it ideal for compact electronics. These models use the same forward converter single switching transistor circuit that has proven its reliability and performance on our single output models.

Download Spec Sheet