Triple Output High Performance Compact Reliable 95-Watt Power Supply
• High Power Density. Up to 1.6 watts per cubic inch
• No Minimum Load Required
• Low EMI. Meets FCC20780, Class A
• Brownout Protection. 16 msecs to hold-up minimum
• Overvoltage and Short Circuit Protection Standard
• Soft Start (Thermistor)
• 16 Hour Burn In
AC INPUT:
90 to 132 and 180 to 265 Vrms, 47 to 400Hz,
single phase. Dual input selectable
EFFICIENCY:
65% typical.
LINE REGULATION:
0.2% for full input charge between 90 and
132 or 180 and 254 Vrms. Temperature
and load constant.
LOAD REGULATION:
Main output – 0.2%; other regulated outputs,
1%; semi-regulated outputs, ± 10%
RIPPLE AND NOISE:
Main output – 1oomV peak-to-peak measured
with a 15 MHz bandwith. All other outputs
- 200mV peal-to-peak when measured
with a 15 MHz bandwidth.
OPERATING TEMPERATURE RANGE:
0ºC to +85ºC
ISOLATION:
Input to Output 1000 VDC
Input to Case 1000 VDC
Output to Case 500 VDC
SHORT CIRCUIT PROTECTION:
Complete protection against a short circuit of
any duration with automatic restart.
Output No.1 and No.4 with 12 or 24 VDC each
have current limiter nominally set at 120%
which shuts down all outputs when activated.
Outputs 2, 3 with ± 12 and ± 15 VDC have a fold-
back circuit which shuts down the affected
output only.
REMOTE ERROR SENSING:
Regulator monitors the voltage of Output No. 1
Directly at the load using extra “Sensing” leads
and compensates for a DC voltage drop up to 0.3
Volts in the load leads.
INPUT PROTECTION:
External fuse recommended.