200 Watt Enclosed AC to DC Switcher AM200S
- Power Factor Correction
- Fully compliant with MIL-STD-461, CE101, CE102
- Meets MIL-S-901 (High Impact shock)
- Meets MIL-STD-810
- FCC 20780 class A EMI compliance
- Fully Sealed to Meet IP65
95-260 VAC 47-440Hz single phase. Power factor corrected. Meets MIL-STD-1399, Section 300, type I requirements (spike voltage test).
±1% of nominal over the full input range.
±1% for change from no load to full load.
RIPPLE AND NOISE:
Peak-to-peak combined ripple and noise does not exceed 2% of nominal on the output measured with a 20 MHz bandwidth.
OPERATING TEMPERATURE RANGE:
-40°C to +70°C
Input to Output 1500 VDC
Input to Case 1500 VDC
Output to Case 500 VDC
SHORT CIRCUIT PROTECTION:
Each unit is completely protected against a short circuit of any duration. The output voltage automatically restores to normal when the short is removed.
2 lbs typical.
Shock Test: Unit meets MIL-S-901 requirements (light weight)
Vibration Test: Unit meets MIL-STD-167, type 1 requirements
Humidity: Power supply operates without any evidence of degraded performance in non-condensing relative humidity up to 95% (select Model AM200EC for 100% condensing environment).