200 Watt AC to DC Switchers AS200
- Power Factor Correction
- Fully compliant with MIL-STD-461, CE101, CE102
- Meets MIL-S-901 (High Impact shock)
- Meets MIL-STD-810
- FCC 20780 class A EMI compliance
- Compact PCI option available
- IP65/IP67 models available (see AM200 line)
95-260 VAC 47-440Hz single phase. Power factor corrected. Meets MIL-STD-1399, Section 300, type I requirements (spike voltage test).
80% minimum or greater.
±1% of nominal over the full range of line input voltage.
±1% for change from no load to full load.
RIPPLE AND NOISE:
Peak-to-peak combines ripple and noise does not exceed 2% of nominal on the output measured with a 20 MHz bandwidth.
OPERATING TEMPERATURE RANGE:
Storage, transportation and handling: – 50° to +85°C. Ambient temperature: -40°C to +70°C baseplate with no power derating.
The input power circuits and DC output voltage lines are isolated from the chassis. Isolation voltage 500 VDC.
SHORT CIRCUIT PROTECTION:
Each unit is completely protected against a short circuit of any duration. The current limit circuit is nominally set at 120% of full load to reduce voltage. The output voltage automatically restores to normal when the short is removed.
Internal fuse. In-rush current limiting.
REMOTE ERROR SENSING:
Inhibit and enable (STANDARD) (TTL LOW = TRUE)
OUTPUT FAULT ALARM (TTL LOW = FAULT)
MTBF 109,000 hours calculated per MIL-HDBK-217 in naval sheltered environment.
Meets the following MIL-STD-461 requirements: CE101, CE102.
Refer to mechanical drawings.
2 lbs typical.
Shock test: Unit meets MIL-S-901 requirements (light weight).
Vibration test: Unit meets MIL-STD-167, type I requirements.
Humidity: Power supply operates without any evidence of degraded performance in non-condensing relative humidity up to 95%.